Having trouble with your electric stove burner? Don’t worry, fixing it is easier than you might think! With just a few simple tools and a bit of know-how, you can get your burner up and running again in no time.
To understand why your electric stove burner isn’t working, it’s important to know how it operates. When you turn on the burner, it receives a 120-volt AC current through two connecting legs, creating a closed circuit and generating heat. Most issues with electric stove burners stem from an inability to complete this closed circuit.
To diagnose the problem, you can use a multimeter to test the burner’s terminals for continuity. If there’s no continuity, it means the circuit is open and there may be an issue with the connector, switch, or wiring.
To prevent burners from becoming defective, it’s essential to keep them clean and free from food, liquid, and grease. Wipe up any spills immediately and handle the burner coil with care to avoid damage.
Before attempting any repairs, ensure your safety by disconnecting the power supply to the stove. Additionally, be cautious not to expose any electrical components to water, as it can cause damage.
If you have a ceramic cooktop, you’ll need to unscrew the stovetop to access the electrical components beneath it. Use a Phillips-head screwdriver to remove the screws located on the front of the cooktop. Lift the front of the stovetop at an angle and support it with a sturdy object while you inspect the components.
For a coil top stove, you can troubleshoot the issue by lifting or pulling out the burner coil from its receptacle. Be gentle but firm when unplugging it. To access the electrical components, lift the stovetop from the front at an angle and use the supports provided.
To fix a non-working electric stove burner, start by disconnecting the burner and checking for loose connections. If the terminal is damaged, replace the receptacle or the entire burner. Examine the burner receptacle for signs of damage caused by food, liquid, or grease. If it’s badly damaged, replace it with a new one.
For coil top stoves, check the coil for breaks or blistering. If it’s damaged, replace it. You can also use a multimeter to test for continuity by touching the probes to the burner’s terminal. If there’s no continuity, the burner needs to be replaced.
Inspect the wiring and connectors underneath the stove for any damage. If you find any, replace them accordingly. A loose connection can also cause the burner to malfunction, so ensure all connectors are secure.
If none of the above steps resolve the issue, the problem may lie with the burner switch. Swap the suspect burner with a working one to determine if the switch is faulty. In some cases, you may need to remove the stove’s rear panel to access and replace the defective switch.
Remember to exercise caution throughout the repair process and always prioritize your safety. If you’re unsure or uncomfortable with performing the repairs yourself, it’s best to seek assistance from a qualified technician.
Hopefully, these tips will help you diagnose and fix the problem with your electric stove burner. Before you know it, you’ll be back to cooking your favorite dishes!